Professional TS300 Shock Absorption Robot Tank Chassis with Suspension Supporting Holder for Arduino Raspberry Pie, RC Tracked Model with 2pcs DC Encoder Motor for Monitor STEAM Teaching

Product ApplicationCompetition;Graduation design;The engineering prototype;Robot project;DIY creationsTS300 Tank Chassis ParametersName: TS300 shock-absorbing tank chassisMaterial: Aluminum alloySurface: sandblastedColor: BlackTracks: engineering plastics,Drive wheel: aluminum alloyWeighing wheel: aluminum alloyTrack width: 40mm/1.57inWeight: 1.1kg/2.43lbSize: about 269*258*111mm/ 10.6*10.16*4.37 in (length * width * height)Designed load: 8kg/17.64lbIndependent shock absorption systemMotor ParametersName: 25mm gear motorOutput speed: 150±10%rpmNo_load current: 200mA (Max)Stall current: 4500mA(max)Stall torque: 9.5kgNaNRated speed: 100±10%rpmRated torque: 3000gNaNRated current: 1200mA (Max)Noise: 56dBWorking voltage: 9-12VOutside Shaft Length: 14.5mmShaft End Play: 0.05-0.50mmScrew Size:M3.0Dia. Of Shaft phi 4mm, D3.5Encoder ParametersType: AB-phase incremental Hall encoderLine speed: 150 (measured by reducer output shaft)Supply voltage: 5VInterface type: PH2.0 (standard motor cable)Shipping ListMetal part: 1setBearing wheel: 10pcsDriving wheel: 2pcsPlastic track: 2pcsEncoder DC motor: 2pcsScrews kit: 1setOthers: several

• 【Robot Tank Chassis】: You will get: a set of metal kit including 3 parts, 2pcs engineering plastic tracks, 2pcs high torque encoder DC motor, 2pcs driving wheels, 10pcs bearing wheels and screw kits. Note: It is unassembled for shipping convenience! It is not difficult to install, just need your patience by the help of the manual.
• 【Suspension System Design】: This robot tank car chassis is designed with shock absorption. Thus, this tank chassis can easily avoid some obstacles, e.g., crushed stones. So many people use this robot tank chassis (model: TS300) for VR/AR, video monitor, and other applications.
• 【High Torque DC Motor】: Motor is the core for the tank chassis. 2pcs high torque encoder DC motor is used for this robot tank car chassis TS300. One can get the speed feedback by the Arduino UNO R3 / Raspberry pie / Micro-bit programming.
• 【DIY RC Model】: This smart robot tank car chassis is very suitable for the maker, school students for robot learning, STEAM education, teaching, competition. One can DIY a robotic tank car model by PS2 or Bluetooth. We provide the source code based on Arduino controller kit. This robot chassis is a research and learning kit for adult college students.
• 【Flexible Design】: This tank car chassis is exquisitely designed.. 1) The length of track can be adjustable by the requirements. Since different people needs different length of track or for the backup. We will provide much tracks. 2) The tank car chassis is metal, and the load wheel is equipped with bearings to reduce the friction.