EV Charger Retractable Cord Reel, Sliding Ceiling Cableway, Overhead EV Charging Cable Organizer for 2-Car Garage, 6.6 ft Reach, Tesla NACS & J1772 Compatible

Keep EV Charging Cables Off the Floor and Out of the Way This EV charger retractable cord reel with sliding ceiling cableway is designed for drivers who are tired of stepping over heavy charging cables on the garage floor. Instead of snaking across the ground, your EV cable travels overhead—making daily Level-2 charging cleaner, safer, and easier to share between vehicles. Designed for 2-Car Garages and Shared Chargers A steel wire rope (up to about 11.5 ft long, cut to length during installation) stretches across your garage ceiling so the cable retractor can glide left and right. This lets a single EV charger conveniently serve an SUV, sedan, or work truck in different parking spots without moving the charger itself. Slide the trolley to the bay you need, pull the cord down, and plug in. One-Hand Operation with Counterbalanced Rewind The compact EV cable retractor uses an internal counterbalance system (around 600–3000 g/1.3-6.6lb) so you can pull the cord down with one hand and have it stay where you put it. When you’re finished charging, a soft, damped rewind helps the cable retract smoothly back toward the ceiling, instead of whipping upward like a spring reel. Safer, Cleaner Charging for Families, Kids, and Pets Floor-level cables can be a trip hazard and get caught under tires, dragged through water, or covered in dirt and road salt. By keeping the charging cable suspended overhead, this ceiling-mount organizer helps reduce trips and wheel run-overs while keeping your cord cleaner. Children, pets, and carts can move through the garage without stepping over a live charging cable. Fits Common Tesla NACS and J1772 Cables The adjustable clamp and guide system fits most home EV charging cables with typical outer diameters from about 9–20 mm, including many Tesla NACS and J1772 cords. It’s a simple way to add professional-looking cable management to your existing wall-mount charger without replacing your EVSE. Simple DIY Installation Mount the retractor base to a ceiling joist or wall stud, run the steel wire rope across the desired span, and tension it according to the instructions. Basic tools are all most homeowners need. Once installed, you’ll have a flexible, overhead EV charger cable management system that helps your garage look tidier and feel safer every day. Note: This product is intended for cable management only. Do not use it to suspend the EV charger body or any other heavy device.

• Overhead EV Cable Management for Home Garages Keep your EV charging cable off the floor with this EV charger retractable cord reel and sliding ceiling cableway. Designed for daily Level-2 charging in 1- and 2-car garages, it routes the cord overhead instead of across the ground to reduce trip hazards, wheel run-overs, and grime.
• Sliding Track Covers Multiple Parking Spots A cut-to-length steel wire rope (up to about 11.5 ft) lets the EV charger cable retractor glide left and right across the garage ceiling. One device can serve an SUV, sedan, or work truck in different bays—ideal for 2-car garages sharing a single EV charger without relocating hardware.
• One-Hand Pull Operation with Soft Rewind The built-in counterbalance (approx. 600–3000 g/1.3-6.6lb) lets you pull the cable down with one hand and keeps tension on the line so the cord stays suspended in mid-air. A damped rewind mechanism helps the EV cable retract smoothly instead of snapping back, for safer, quieter daily use.
• Child & Pet Friendly, Floor Cable Mess Reduced By holding the EV cable overhead instead of lying in puddles and dust, this ceiling-mount EV charger cord organizer helps make your garage neater and more family-friendly. Kids, pets, and strollers can pass underneath without stepping over a heavy cable on the floor.
• Fits Most Home EV Charging Cables, Easy to Install Compatible with Tesla NACS and most J1772 EV charging cables in typical 9–20 mm diameters, this lightweight cable retractor mounts to ceiling joists or wall studs with basic tools. Use it as an EV charger cable management solution for home garages, small shops, or workplace parking areas. For cable management only—do not suspend the EVSE body directly.