Digital Force Gauge, High Precision Digital DS2-500N 1000N Push Force Gauge 20N 2KGS Pull Strength Tester Small Sensor Dynamometer(DS2-50N)

SincerelyDT storeDS2-5N/50N/500N/1000NProduct description:Thank you for choosing his brand DS2 series digital force gauge, this type of push pull technology personnel outwit precision instruments Co. Ltd., Dongguan city through years of experience in research and development of mechanical equipment combined with the latest technology developed new products, the products of high precision and long service life, simple operation, long standby. DS2 series digital push pull meter is a small, multi-function and high precision push and pull load test instrument. It is suitable for various kinds of push and pull load test, and thrust test, damage test and so on. The digital display has high resolution and easy to use. It is a new generation of high efficiency and high precision mechanical testing instruments.Product parameter:Maximum load value: 2N (200gf) to 1000N (100kgf)Display: 4 bit LCD displaySafety overload: 150% rated (100% flashing warning)Power supply: built in safety, , high-capacity lithium battery, external AC adapterWeight: approximately 520g, depending on maximum load value.Output function: USB connect computer, digital display tension and pressureStandard accessories: 6 accessories, AC adapter, portable caseAccuracy: + 0.1%F.SSampling rate: 1000 times per secondThe screen flash indicates overload; the low battery symbol blinksFour bit LCD, display data can be positive and negative displayProduct features:1. high precision and high resolutionAccuracy is better than level 0.2 (that is, 0.2%F.S plus or minus 1digit); minimum readings are 0.001N.2. peak hold functionYou can grab the peak value (maximum) in the test process3. comparison functionThe upper and lower limit deviation is set freely, and the screen flash hint. The result can be seen intuitively by the eyes. The result of misjudgment will not be produced4. simple conversion between three commonly used mechanical units in the worldIt can be converted quickly in three units of measurement, N, KGF and lbf.5. sampling speed optionalThe instrument can select the appropriate sampling rate according to the actual situation of the test, when the need to enter sensitive reaction (such as tensile test materials when needed) high sampling speed, the highest sampling rate can reach 1000 times per second. When low sampling rates are required, low sampling rates can be used to test them.6. LCD LCD screen flip display, using a wide view of the LCM TechnologyThe LCD screen can be turned over at 180 degrees, which is more conducive to viewing the testing process and results in various occasions and various ways of measurement.7. extra long standbyLarge capacity safety lithium battery and ultra-low power processor combine and use the top circuit design level, so that products can achieve long standby (standby for at least 15 days, can be used continuously for at least a week), the operation is very simple and easy to useHign-concerned Chemical : NoneModel Number : DS2-500NMax Load : 500NDisplay Type : DIGITALDisplay : 4 bit LCD display

• 1. high precision and high resolution:Accuracy is better than level 0.2 (that is, 0.2%F.S plus or minus 1digit); minimum readings are 0.001N.
• 2. peak hold function:You can grab the peak value (maximum) in the test process
• 3. comparison function:The upper and lower limit deviation is set freely, and the screen flash hint. The result can be seen intuitively by the eyes. The result of misjudgment will not be produced
• 4. simple conversion between three commonly used mechanical units in the world:It can be converted quickly in three units of measurement, N, KGF and lbf.
• 5. sampling speed optional:The instrument can select the appropriate sampling rate according to the actual situation of the test, when the need to enter sensitive reaction (such as tensile test materials when needed) high sampling speed, the highest sampling rate can reach 1000 times per second. When low sampling rates are required, low sampling rates can be used to test them.