Carbyne 15 in. Wrench Extender

Every mechanic has met the bolt that will not move. You have the right wrench, it is seated properly, and there is simply not enough handle to break the fastener loose. The usual answer is a length of scrap pipe, which works right up until it slips. The CARBYNE 15 in. Wrench Extender is the purpose-built version of that idea. It slips over the handle of a combination wrench and turns it into a much longer lever, so the same effort at your hand arrives at the fastener as far more turning force. WHY LENGTH MATTERS Torque is force multiplied by distance. Adding 15 in. of handle is the cheapest way to add turning force to a wrench you already own, and it is why this tool exists. Many extenders in this category are noticeably shorter. WHERE IT EARNS ITS KEEP Rusted bolts. Seized fasteners. Nuts that somebody before you put on far too tight. Fasteners buried behind a bracket or deep in a bay where you cannot get an arm in, let alone a swing. WORKS WITH WHAT YOU HAVE Designed for standard combination wrenches up to 30mm / 1-3/16 in. There is no matched set to buy and nothing to adapt. BUILT FOR THE LOAD Chrome Vanadium steel with a mirror-polished chrome finish, made to take the torque it is designed to create. CARBYNE LIFETIME WARRANTY Every CARBYNE tool meets and exceeds ANSI standards and is backed by our LIFETIME WARRANTY, 100% risk-free. We are a U.S.A.-based, family-run tool company and we stand behind every tool we make.

• BREAK LOOSE WHAT A WRENCH ALONE CANNOT: Slip this 15 in. wrench extender over the handle of your combination wrench and the extra length multiplies the torque you can apply, so rusted bolts, seized fasteners and over-tightened nuts give up without a fight.
• 15 INCHES OF LEVERAGE: At a full 15 in., this extension wrench gives you meaningfully more leverage than the shorter extenders in this category, and length is the whole point of the tool. More reach means more torque at the fastener for the same effort at your hand.
• REACH FASTENERS YOU CANNOT GET AN ARM TO: Deep in an engine bay, behind a bracket, under a frame rail, this tight reach extension wrench puts turning force where your hands and a bare wrench will not go, and keeps your knuckles off the surrounding metal.
• A CONTROLLED ALTERNATIVE TO A CHEATER PIPE: A length of scrap pipe over a wrench handle is the improvised version of this tool, and it slips. This is a purpose-built leverage bar that seats on the wrench and stays there, so force goes into the fastener instead of into a near miss.
• FITS THE WRENCHES YOU ALREADY OWN: Works with standard combination wrenches up to 30mm / 1-3/16 in., so it earns its place in the box without needing a matched set to go with it.
• CHROME VANADIUM STEEL, MIRROR-POLISHED: Chrome Vanadium steel construction takes the torque this tool is designed to generate, and the mirror-polished chrome finish resists rust and wipes clean after dirty jobs.
• CARBYNE LIFETIME WARRANTY: Every CARBYNE tool meets and exceeds ANSI standards and is backed by our LIFETIME WARRANTY, 100% risk-free. As a U.S.A.-based, family-run tool company, we proudly stand behind every CARBYNE tool and everyone who puts it to work.